• Ø110mm
• Can measure AC current up to 1000A
• Flexible and light weight by the air core coil used at the sensor part
• Designed to meet the international safety standard IEC 61010-1 CAT IV 300V, CAT III 600V
• Ø150mm
• Flexible for various test fields
• Can measure AC current up to 3000A
• Flexible and light weight by the air core coil used at the sensor part
• Measurable conductor size: max Φ150mm
• Designed to meet the international safety standard IEC 61010-1 CAT III 600V
• Ø24mm
• Ø40mm
• Ø55mm
• Ø68mm
• Ø40mm
• Ø40mm
• Ø24mm
• Ø24mm
• Ø24mm
• Ø40mm
• Ø68mm
• Ø24mm
• Ø40mm
• Ø68mm
Floating voltage can be measured
• AC Clamp Sensor
• KEW 8161 clamp Sensor is designed to be an AC current/voltage conversion probe capable of measuring AC current up to 100A in conjunction with digital multimeters
• AC CLAMP ADAPTOR
• Model 8112 clamp adaptor is designed to be an AC current/voltage conversion probe capable of measuring AC current from 0.1mA to 120A in conjunction with digital multimeters.
Simple to operate, the unit has range switch position at 200mA,2A and 20A. It also features safety design throughout with no exposed metal parts.
• AC Clamp Adaptor
• Model 8112BNC is an AC clamp adaptor designed for use with oscilloscopes. Output cord has a BNC connector which enables direct observation of current waveform on oscilloscope. Refer to a diagram shown at left for application. Specifications are same as those for Model 8112.
• Permits extension of the AC and DC current ranges of almost any Digital Multimeters (DMMs) without breaking the circuit under test.
• Using KEW 8115 with KEW 1051/1052 (DMM) the display can be set for direct reading in A.
• Adaptor designed to increase the measuring capability of your clamp meters.
• With the use of the multi-tran you can not only extend current ranges but also on a conductor of larger diameter.